Fujifilm X-H2S / X-H2 / X-T5 / X-T4 / X-T3 / X-S20 / X-S10 / And More Firmware Updates Released


X Series Camera Body
FUJIFILM X-H2S Ver.5.10

The firmware update Ver.5.10 from Ver.5.03 incorporates the following issues:Refer to “X-H2S New Features Guide” and “X-H2S Network and USB Setting” for operating instructions and explanations on the revised items described in the item No.1, No.2 and No.3 below.

・X-H2S New Features Guide: EnglishFrançaisDeutschEspañolItalianoNederland, PolskiSvenskaNorskDanskPусскийSuomi中文简中文繁體한국어ภาษาไทยArabic
・X-H2S Network and USB Setting: EnglishFrançaisDeutchEspañolItalianoNederlandPolskiSvenskaNorskDanskPусскийSuomi中文简中文繁體한국어ภาษาไทยArabic

The “TIME CODE SYNC. SETTING” option is added to “TIME CODE SETTING” in the movie mode to allow time code synchronization with external devices.
This allows connection to the ATOMOS AirGlu accessory, “UltraSync BLUE” via Bluetooth. In addition, timecode synchronization with multiple cameras (up to 6 cameras) is possible by acquiring timecode from “UltraSync BLUE”.

The connection procedure and display function at remote recording are improved when using File Transmitter FT-XH as follows.
(1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tablet’s camera app to obtain the MAC address and IP address of the camera automatically.
(2)A “MULTI” button is added to the “Remote Rec Function” menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the “SINGLE” button bring back to the single screen display.
(3)A “Clean display mode” is added to the “Remote Rec Function” menu. When “Clean display mode” is selected, only the Live View is displayed.

Note:The firmware of the File Transmitter FT-XH must be upgraded to the latest version to enable those functions above. Be sure to update the camera’s firmware to the latest version before updating the firmware for the File Transmitter FT-XH.

The smartphone icon and Bluetooth icon are now displayed on the camera’s display screen when the camera and smartphone are connected via Bluetooth.

Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.

[Target interchangeable lens]
XF16-55mmF2.8 R LM WR:Ver. 1.30 or later

Note:Make sure to update the camera’s firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.

Other minor bugs are fixed.

FUJIFILM X-H2 Ver.3.10 

The firmware update Ver.3.10 from Ver.3.03 incorporates the following issues:

Refer to “X-H2 New Features Guide” and “X-H2S Network and USB Setting” for operating instructions and explanations on the revised items described in the item No.1, No.2 and No.3 below.
・X-H2 New Features Guide: EnglishFrançaisDeutschEspañolItalianoNederland, PolskiSvenskaNorskDanskPусскийSuomi中文简中文繁體한국어ภาษาไทยArabic
・X-H2 Network and USB Setting: EnglishFrançaisDeutchEspañolItalianoNederlandPolskiSvenskaNorskDanskPусскийSuomi中文简中文繁體한국어ภาษาไทยArabic

The “TIME CODE SYNC. SETTING” option is added to “TIME CODE SETTING” in the movie mode to allow time code synchronization with external devices.

This allows connection to the ATOMOS AirGlu accessory, “UltraSync BLUE” via Bluetooth. In addition, timecode synchronization with multiple cameras (up to 6 cameras) is possible by acquiring timecode from “UltraSync BLUE”.

The connection procedure and display function at remote recording are improved when using File Transmitter FT-XH as follows.
(1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tablet’s camera app to obtain the MAC address and IP address of the camera automatically.
(2)A “MULTI” button is added to the “Remote Rec Function” menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the “SINGLE” button bring back to the single screen display.
(3)A “Clean display mode” is added to the “Remote Rec Function” menu. When “Clean display mode” is selected, only the Live View is displayed.

Note:The firmware of the File Transmitter FT-XH must be upgraded to the latest version to enable those functions above. Be sure to update the camera’s firmware to the latest version before updating the firmware for the File Transmitter FT-XH.

The smartphone icon and Bluetooth icon are now displayed on the camera’s display screen when the camera and smartphone are connected via Bluetooth.

Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.

[Target interchangeable lens]
XF16-55mmF2.8 R LM WR:Ver.1.30 or later

Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.

Other minor bugs are fixed.

FUJIFILM X-T5 Ver.2.10

The firmware update Ver.2.10 from Ver.2.03 incorporates the following issues:

Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.

[Target interchangeable lens]
XF16-55mmF2.8 R LM WR:Ver.1.30 or later

Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.

The firmware bug is fixed that a white horizontal line appears on the preview image in the LCD monitor when shooting with the focus point locked by touch panel operation.

The firmware bug is fixed that the LED catchlight of the FLASH stays illuminated when the SHOE MOUNT FLASH is attached and photographed under the following setting conditions.
・SHUTTER TYPE:ES ELECTRONIC SHUTTERES
・DRIVE SETTING:High-speed burst or Low-speed burst
・LED light:CATCHLIGHT

The firmware bug is fixed that the camera does not synchronize properly depending on the shutter speed setting when shooting with “EF E-FRONT CURTAIN SHUTTER” with SHOE MOUNT FLASH (EF-60) attached.

Other minor bugs are fixed.

FUJIFILM X-T4 Ver.2.10

The firmware update Ver.2.10 from Ver.2.01 incorporates the following issues:

Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.

[Target interchangeable lens]
XF16-55mmF2.8 R LM WR:Ver.1.30 or later

Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.

Other minor bugs are fixed.

FUJIFILM X-T3 Ver.5.10

The firmware update Ver.5.10 from Ver.5.01 incorporates the following issues:

Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.

[Target interchangeable lens]
XF16-55mmF2.8 R LM WR:Ver.1.30 or later

Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.

The firmware bug is fixed that a image becomes abnormal color tone in rare cases under the following configuration conditions.

・SHUTTER TYPE:ES ELECTRONIC SHUTTERES
・DRIVE SETTING:High-speed burst
・AF/MF SETTING:RELEASE PRIORITY or MF
・SHUTTER SPEED:1/2.5, 1/5 or 1/6

Other minor bugs are fixed.

FUJIFILM X-S20 Ver.1.20

The firmware update Ver.1.20 from Ver.1.13 incorporates the following issues:

Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.

[Target interchangeable lens]
XF16-55mmF2.8 R LM WR:Ver.1.30 or later

Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.

Other minor bugs are fixed.

FUJIFILM X-S10 Ver.3.10 

The firmware update Ver.3.10 from Ver3.01 incorporates the following issues:

Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.

[Target interchangeable lens]
XF16-55mmF2.8 R LM WR:Ver.1.30 or later

Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.

Other minor bugs are fixed.

X Series XF Lens
XF16-55mmF2.8 R LM WR Ver.1.30 

The firmware update Ver.1.30 from Ver.1.20 incorporates the following issue:

Exposure tracking during zoom operation is improved when using the following cameras.

[Applicable cameras]
X-H2S (Ver.5.10 or later), X-H2 (Ver.3.10 or later), X-T5 (Ver.2.10 or later), X-T4 (Ver.2.10 or later), X-T3 (Ver.5.10 or later), X-S20 (Ver.1.20 or later) and X-S10 (Ver.3.10 or later)

Note:Make sure to update the camera’s firmware to the latest version before updating the firmware of the interchangeable lens to enable those functions above.

X Series Accessories
File transmitter FT-XH Ver.2.10

The firmware update Ver.2.10 from Ver.2.00 incorporates the following issue:

The connection procedure and display function at remote recording are improved when attaching to X-HS2 or X-H2 camera.

(1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tablet’s camera app to obtain the MAC address and IP address of the camera automatically.
(2)A “MULTI” button is added to the “Remote Rec Function” menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the “SINGLE” button bring back to the single screen display.
(3)A “Clean display mode” is added to the “Remote Rec Function” menu. When “Clean display mode” is selected, only the Live View is displayed.

[Applicable cameras]
X-H2S firmware update:Ver.5.10 or later
X-H2 firmware update:Ver. 3.10 or later

Note:Make sure to update the camera’s firmware to the latest version before updating the firmware for the File Transmitter FT-XH.

Follow Fujiaddict on Facebook, TwitterInstagram, and YouTube

Plus, our owners’ groups
Fujifilm GFX Owners Group
Fujifilm X-H Owners Group
Fujifilm X-T Owners Group
Fujifilm X-S Owners Group
Fujifilm X-Pro Owners Group
Fujifilm X-E Owners Group
Fujifilm X-A Owners Group
Fujifilm X100 Owners Group

This entry was posted in Firmware, Fujifilm X-H2, Fujifilm X-S10, Fujifilm X-S20, Fujifilm X-T3, Fujifilm X-T4, Fujifilm X-T5 and tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , . Bookmark the permalink. Trackbacks are closed, but you can post a comment.
  • FCC disclosure statement: this post may contain affiliate links or promotions that do not cost readers anything but help keep this website alive. As an Amazon Associate I earn from qualifying purchases. Thanks for your support!