Fringer EF/FX Smart Adapters Firmware 1.10

The first firmware update, i.e. v1.10, is available now. All Fringer EF-FX Pro adapters are suggested to be upgraded.

The new firmware mainly addressed following issues and added some lenses to tested and optimized lens list.

  1. Fixed IS not stable issue for some EF lenses.
  2. Fixed some compatibility issues for Tamron lenses.
  3. Added following lenses to the tested and optimized lens list:
    • Canon EF 50/1.8 II
    • Canon EF 70-200/2.8L IS
    • Canon EF-S 17-55/2.8 IS
    • Tamron SP10-24/3.5-4.5 Di II VC HLD B023

You may download the new firmware and its release note as well as user’s manual from the official website.

Be noted there are two versions.

  • EFFX110P.BIN for Pro version: Electronic aperture ring set aperture
  • EFFX110S.BIN for Standard version: Camera command dial set aperture

You need a PC or MAC and a USB Micro B cable to upgrade the adapter.

  1. Connect the adapter to your computer.
  2. Find a new driver named “FRINGER” and copy new firmware to it.
  3. Wait for 10 seconds and then disconnect the adapter.
  4. Reconnect it again to check installed firmware version (VERSION.TXT on the adapter)

Read user’s manual for more detailed description on how to upgrade your adapter.

Download Here

via FringerDev

This entry was posted in 3rd Party Lens and tagged , , , , , , , , . Bookmark the permalink. Trackbacks are closed, but you can post a comment.
  • FCC disclosure statement: this post may contain affiliate links or promotions that do not cost readers anything but help keep this website alive. As an Amazon Associate I earn from qualifying purchases. Thanks for your support!