Fujinon XC 15-45: B&H Photo / Amazon / Adorama
XC15-45mmF3.5-5.6 OIS PZ Firmware 1.10 update Download Here
Detail of the firmware update
Ver.1.10
Revised specification from Ver.1.03 to Ver.1.10
When the camera (*1) and tripod Grip, “TG-BT1” are connected via Bluetooth, zooming can be controlled with “T/W button” on the “TG-BT1”.
*1:Cameras and firmware versions that have connectivity with “TG-BT1”
・X-H2S: Ver.3.00 or later
・X-H2: Ver.1.20 or later
・X-T5: Ver.1.00 or later
・X-T4: Ver.1.70 or later
・X-T3：Ver.4.50 or later
・X-S10: Ver.2.60 or later
・X-T30 II: Ver.1.20 (*2)
・X-T30: Ver.1.50 (*2)
*2:T/W button on the “TG-BT1” does not function with those cameras.
Note-1:
Firmware update for the camera is required to enable this function. Make sure to update the camera firmware to the latest firmware before updating the lens firmware.
List of Compatible Cameras
The zooming and focusing buttons on the following camera menus will function when the lens are attached with the proper cameras (*3).
Camera menus that will be supported:
(1)[SETUP MENU]➔ [BUTTON/DIAL SETTING]➔ [TOUCH SCREEN SETTING]➔ [TOUCH ZOOM]
(2)[SETUP MENU]➔ [BUTTON/DIAL SETTING]➔ [LENS ZOOM/FOCUSL SETTING]
・ [CONSTANT SPEED ZOOM (8 steps)]
・ [CONSTANT SPEED FOCUS (8 steps)]
・ [CONSTANT SPEED ZOOM/FOCUS (Fn) OPERATION] for switching “START/STOP SWITCH” or “ACTIVE WHILE PRESSING”
・ [ZOOM RING ROTATE]
・ [ZOOM/FOCUS CONTROL RING] for switching “Zoom” or “Focus”
*3:Proper cameras and firmware versions
・X-H2S: Ver.1.00 or later
・X-H2: Ver.1.00 or later
・X-T5: Ver.1.00 or later
・X-T4: Ver.1.60 or later
・X-T3：Ver.4.40 or later
・X-S10: Ver.2.50 or later
Note-1:
Firmware update for the camera is required to enable this function. Make sure to update the camera firmware to the latest firmware before updating the lens firmware.
List of Compatible Cameras
Aperture control parameters have been optimized to improve exposure tracking during movie recording.
