Shoten (Techart) EF-FG 01 Firmware Update 2.0.1

• 6 years ago

The Shoten EF-FG01 just received a firmware update to 2.0.1 and you can download it here. The Shorten EF-FG01 is basically just a generic Techart EF-FG01.

Improvements

Corresponds to “35 mm format mode” setting

Initialization of TechartEF-GFX adapter

The firmware v2.0.1 requires initialization at first connection. The camera has to save the parameters of your lens in the first connection. The lens will run a full focusing from closest to infinity automatically after connected. (it normally takes less than 5 seconds).  Please do not disturb or press any buttons during this initialization process. Once the camera has saved the parameters of the lens in the first connection, no further initialization is needed for the same lens. This initialization will repeat itself when a different lens is mounted onto the adapter.

Update Instructions

1. Prepare a mini-USB cable and connect the adapter to a computer with Windows 8 / 10 operating system
2. Unzip and open the application.
3. Left-click the EF-GF01 Adapter firmware
4. Click the ‘Update’ button
5. Wait until the power bar goes to complete (It usually takes less than 10 seconds)
6. Update is finished

via stkb