Big Fujifilm X-T5, X-H2, X-S20, and X100VI Firmware Updates Released

• 8 months ago

Fujifilm X-T5 Firmware Ver.3.01 Download Here

The firmware update Ver.3.01 from Ver.2.10 incorporates the following issues:

Please refer to the “X-T5 New Features Guide” for detailed descriptions.

X-T5 New Features Guide: English

The following camera linkage features enhanced with FUJIFILM XApp, Ver.2.0.0 to Ver.2.1.0, are now supported.

Note:The following functions 1) and 2) are supported with FUJIFILM XApp Ver 2.0.0 or later and 3) to 5) are with Ver.2.1.0 or later.

1)The following camera data, such as registration and operation information, are now displayed in the “Equipment” tab with FUJIFILM XApp.

［Camera data to be displayed in the “Equipment” tab in the “FUJIFILM XApp”］

・Number of lifetime shots

・MECHANICAL SHUTTER

・BATTERY AGE

・Number of days since the last sensor cleaning etc.

2)Camera firmware upgrade process becomes easier.

The “FUJIFILM XApp” automatically downloads and transfer the revised firmware to the memory card in the camera in the background, so that you can upgrade the firmware anytime.

Note-1:Background data transfer is performed while the camera and “FUJIFILM XApp” are connected via Wi-Fi.

Note-2:Once the revised firmware is automatically downloaded, the firmware update information is displayed on the LCD, prompting the operator to update to the latest firmware.

Note-3:It will work at next firmware update although the firmware is modified with this version.

3)RAW image transfer to “FUJIFILM XApp” is now supported

4)Once FUJIFILM XApp connects to the camera, you can shoot and control the camera with smartphone even if the camera is turned off by “AUTO POWER OFF” mode setting.

5)You can browse and transfer images to the camera with FUJIFILM XApp even while the camera is turned off.

Note:Be sure to update “FUJIFILM XApp” to the latest version (Ver.2.1.0 or later) in order to use these new features above.

AF performance is improved as follows.

1)In Focus Mode AF-C, AF tracking performance has been improved in scenes where the camera tends to lose focus.

2)A firmware bug is fixed that the AF focusing accuracy and distance indicator varied when using a wide-angle lens.

The following functions related to movie recording is implemented to improve usability at movie shooting.

“WIDE/TRACKING” function is added for focusing during movie recording. In case that the focus mode is set to AF-C, the camera automatically tracks the subject while touching the screen and in AF-S, the camera automatically selects the subject to focus on.

・AF/MF SETTING＞AF MODE＞WIDE/TRACKING

”FIRMWARE UPDATE” function is added to the setup menu.

Insert a memory card containing the new firmware into the camera and select [USER SETTING] in the [SET UP] menu to update the firmware.

The current procedure for firmware update can also continue to be used as follows.

・Start the camera while holding down the DISP/BACK button to update the firmware.

・Connect to a smartphone application to update firmware.

“AUTO POWER OFF TEMP.” setting screen is now displayed at initial setup, so that you can set the temperature (STANDARD/HIGH) to automatically turn off the power in case that the camera temperature rises.

Note:After updating to firmware version 3.01, a setup screen will appear.

Connecting to “Adobe Camera to Cloud” is now available

Still images and movies can be uploaded directly to the Frame.io platform via Internet connection. This enables direct data transfer from the camera to the cloud and edit them at the shooting location, which allows you to access to still images and movie being created and accelerating movie production work in real time and remotely and contributes greatly to the efficiency of movie production workflows.

Wi-Fi connection performance is improved, so that the usability for the communication functions becomes more comfortable, such as Frame.io.

A firmware bug is fixed that the exposure of the images taken changes slightly in case that the “INTERVAL TIMER SHOOTING“ is set at the manual mode.

A firmware bug is fixed that the aperture value fluctuates while zooming at “Burst” mode with fixed aperture value.

A firmware bug is fixed that the area settings in some regions are not automatically updated when connecting the camera to the “FUJIFILM XApp” to synchronize time.

Note:FUJIFILM XApp, Ver.2.0.3, for iOS & Android are now available

A firmware bug is fixed that the noise reducing effects is emphasized too much when shooting 4K movie under the following setting conditions.

・Setting condition: “Manual setting” and “DYNAMIC RANGE”＞200 to 400%

Other minor bugs are fixed.

Fujifilm X-H2 Firmware Ver.4.00 Download Here

The firmware update Ver.4.00 from Ver.3.10 incorporates the following issues:

Please refer to the “X-H2S New Features Guide” and “X-H2S Network and USB Settings” for detailed descriptions.

・X-H2 New Features Guide: English

・X-H2 Network and USB Setting: English

The following camera linkage features enhanced with FUJIFILM XApp, Ver.2.0.0 to Ver.2.1.0, are now supported.

Note:The following functions 1) and 2) are supported with FUJIFILM XApp Ver 2.0.0 or later 3) are with Ver.2.1.0 or later.

1)The following camera data, such as registration and operation information, are now displayed in the “Equipment” tab with FUJIFILM XApp.

［Camera data to be displayed in the “Equipment” tab in the “FUJIFILM XApp”］

・Number of lifetime shots

・MECHANICAL SHUTTER

・BATTERY AGE

・Number of days since the last sensor cleaning etc.

2)Camera firmware upgrade process becomes easier.

The “FUJIFILM XApp” automatically downloads and transfer the revised firmware to the memory card in the camera in the background, so that you can upgrade the firmware anytime.

Note-1:Background data transfer is performed while the camera and “FUJIFILM XApp” are connected via Wi-Fi.

Note-2:Once the revised firmware is automatically downloaded, the firmware update information is displayed on the LCD, prompting the operator to update to the latest firmware.

Note-3:It will work at next firmware update although the firmware is modified with this version.

3)RAW image transfer to “FUJIFILM XApp” is now supported

Note:Be sure to update “FUJIFILM XApp” to the latest version (Ver.2.1.0 or later) in order to use these new features above.

AF performance is improved as follows.

1)In Focus Mode AF-C, AF tracking performance has been improved in scenes where the camera tends to lose focus.

2)A firmware bug is fixed that the AF focusing accuracy and distance indicator varied when using a wide-angle lens.

The following functions related to movie recording is implemented to improve usability at movie shooting.

1)A frame to indicate recording in progress is now displayed on the screen while recording the movie.

・MOVIE SETTING＞REC FRAME INDICATOR

2)The start and end sounds are now sounding during movie recording.

・SETUP MENU＞SOUND SETTING＞REC START/STOP VOLUME

3)“SELF-TIMER” is added to the “MOVIE SETTING”, so that you can set the time from pressing the shutter release button to starting the movie recording.

・MOVIE SETTING＞SELF-TIMER

4)“WIDE/TRACKING” function is added for focusing during movie recording. In case that the focus mode is set to AF-C, the camera automatically tracks the subject while touching the screen and in AF-S, the camera automatically selects the subject to focus on.

・AF/MF SETTING＞AF MODE＞WIDE/TRACKING

”FIRMWARE UPDATE” function is added to the setup menu.

Insert a memory card containing the new firmware into the camera and select [USER SETTING] in the [SET UP] menu to update the firmware.

The current procedure for firmware update can also continue to be used as follows.

・Start the camera while holding down the DISP/BACK button to update the firmware.

・Connect to a smartphone application to update firmware.

“AUTO POWER OFF TEMP.” setting screen is now displayed at initial setup, so that you can set the temperature (STANDARD/HIGH) to automatically turn off the power in case that the camera temperature rises.

Note:After updating to firmware version 4.00, a setup screen will appear.

Wi-Fi connection performance is improved, so that the usability for the communication functions becomes more comfortable, such as Frame.io.

Uploading still images and movies to the Frame.io platform is now available without the “File Transmitter FT-XH”.

A firmware bug is fixed that the aperture value fluctuates while zooming at “Burst” mode with fixed aperture value.

A firmware bug is fixed that the exposure of the preview image and the recorded image are different from each other when shooting manually with the XF50mmF1.0 R WR, which has a bright aperture F value.

A firmware bug is fixed that the area settings in some regions are not automatically updated when connecting the camera to the “FUJIFILM XApp” to synchronize time.

Note:FUJIFILM XApp, Ver.2.0.3, for iOS & Android are now available

A firmware bug is fixed that the noise reducing effects is emphasized too much when shooting 4K movie under the following setting conditions.

・Setting condition: “Manual setting” and “DYNAMIC RANGE”＞200 to 400%

Other minor bugs are fixed.

Fujifilm X-S20 Firmware Ver.2.01 Download Here

The firmware update Ver.2.01 from Ver.1.20 incorporates the following issues:

The following camera linkage features enhanced with FUJIFILM XApp, Ver.2.0.0 to Ver.2.1.0, are now supported.

Note:The following functions 1) and 2) are supported with FUJIFILM XApp Ver 2.0.0 or later and 3) to 5) are with Ver.2.1.0 or later.

1)The following camera data, such as registration and operation information, are now displayed in the “Equipment” tab with FUJIFILM XApp.

［Camera data to be displayed in the “Equipment” tab in the “FUJIFILM XApp”］

・Number of lifetime shots

・MECHANICAL SHUTTER

・BATTERY AGE

・Number of days since the last sensor cleaning etc.

2)Camera firmware upgrade process becomes easier.

The “FUJIFILM XApp” automatically downloads and transfer the revised firmware to the memory card in the camera in the background, so that you can upgrade the firmware anytime.

Note-1:Background data transfer is performed while the camera and “FUJIFILM XApp” are connected via Wi-Fi.

Note-2:Once the revised firmware is automatically downloaded, the firmware update information is displayed on the LCD, prompting the operator to update to the latest firmware.

Note-3:It will work at next firmware update although the firmware is modified with this version.

3)RAW image transfer to “FUJIFILM XApp” is now supported

4)Once FUJIFILM XApp connects to the camera, you can shoot and control the camera with smartphone even if the camera is turned off by “AUTO POWER OFF” mode setting.

5)You can browse and transfer images to the camera with FUJIFILM XApp even while the camera is turned off.

Note:Be sure to update “FUJIFILM XApp” to the latest version (Ver.2.1.0 or later) in order to use these new features above.

AF performance is improved as follows.

1)In Focus Mode AF-C, AF tracking performance has been improved in scenes where the camera tends to lose focus.

2)A firmware bug is fixed that the AF focusing accuracy and distance indicator varied when using a wide-angle lens.

The following functions related to movie recording is implemented to improve usability at movie shooting.

“WIDE/TRACKING” function is added for focusing during movie recording. In case that the focus mode is set to AF-C, the camera automatically tracks the subject while touching the screen and in AF-S, the camera automatically selects the subject to focus on.

・AF/MF SETTING＞AF MODE＞WIDE/TRACKING

”FIRMWARE UPDATE” function is added to the setup menu.

Insert a memory card containing the new firmware into the camera and select [USER SETTING] in the [SET UP] menu to update the firmware.

The current procedure for firmware update can also continue to be used as follows.

・Start the camera while holding down the DISP/BACK button to update the firmware.

・Connect to a smartphone application to update firmware.

Connecting to “Adobe Camera to Cloud” is now available

Still images and movies can be uploaded directly to the Frame.io platform via Internet connection. This enables direct data transfer from the camera to the cloud and edit them at the shooting location, which allows you to access to still images and movie being created and accelerating movie production work in real time and remotely and contributes greatly to the efficiency of movie production workflows.

Wi-Fi connection performance is improved, so that the usability for the communication functions becomes more comfortable, such as Frame.io.

A firmware bug is fixed that the exposure of the images taken changes slightly in case that the “INTERVAL TIMER SHOOTING“ is set at the manual mode.

A firmware bug is fixed that the aperture value fluctuates while zooming at “Burst” mode with fixed aperture value.

A firmware bug is fixed that the area settings in some regions are not automatically updated when connecting the camera to the “FUJIFILM XApp” to synchronize time.

Note:FUJIFILM XApp, Ver.2.0.3, for iOS & Android are now available

Other minor bugs are fixed.

Fujifilm X100VI Firmware Ver.1.10